nass magnet offers solenoid valve connectors "with molded cable" in the most popular pin patterns. These are:
Form A, 18mm pin spacing (ISO 4400, EN 175301-803, and old DIN 43650A standards),
Form B, 10mm pin spacing (ISO 6952, EN 175301-803, and old DIN 43650B standards),
Form C, 8.0mm pin spacing (ISO 15217, EN 175301-803, and old DIN 43650C standards),
Industrial Form Type B, 11mm pin spacing, and
Micro Type C, 9.4mm pin spacing.
Common applications are hydraulic and pneumatic solenoid valves, machines, cranes and other industrial electronic equipment . These connectors save wiring time because the cable is already assembled and molded into the connector and they are IP67 rated.
The standard cable lengths are 2 and 5 meters. The connectors are available without circuit and with LED/surge protection in 24 volt AC/DC, 110V AC/DC, and 230 volt AC/DC circuits. The LED light is perfect indication that power is on at the connector as this assist in trouble shooting. Additional circuits such as LED only, rectified, energy saving (PWM), Timer, TVS diode and others are available on requests.
The Form A, Form C, and Micro Type C connectors have double grounds in the 6 and 12h positions to allow mounting flexibility for the direction of the cable. The standard cable jacket material is PVC with PUR jacket material available as an option. The traditional gasket is eliminated as it is integrated into the connector head. The center fixing screw "is made of stainless steel" and is included.
The overmolding material of the connector heads is oil resistant and on request also UV safe which proves the capability of our molded connectors for outdoor applications.